Py Table

[admin]

Hi Drew,

With a FP Move of 5 only the boxes with a "5" may be chosen in the nose arc, in this case 30 degree. I think you are using the "5" column with 4 FP Move. All the "4" boxes in the 200 ft line all the Horizontal FPs are equal to or less than 4, the allowable HFPs are 3H or 4H. The number of vertical flight points are determined by

VFPs = FP Move - HFP.

In (2) above the aircraft has 4 HFPs and may not use any boxes with a "5".

Does this help or is more information needed?

Cheers,

Steve