Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Combined transition and turns
07-02-2014, 01:43 PM
Post: #1
Combined transition and turns
Is it possible to combine transitions and turns at diferent rates?. For example, I have a plane, banked 60R and I want to make a +3G transition and a +5G turn at the same time to maximiize performance. Is it possible? How to post it?.
Used to the FW system I'm still a bit confused on how to state the transitions as they are not explicted anywhere, only by the initial / final plane attitude.

Thanks

Pablo
Find all posts by this user
Quote this message in a reply
07-03-2014, 06:39 AM
Post: #2
RE: Combined transition and turns
Hi Pablo,

Yes, you may combine turns and transitions that have different G-Loading. In your case you are banked at R60u and in the basic rules are limited to facing changes (turns ;-) up to +5 G and transitions of +3G.

Below is a move from a play test game, I would note any transitions in the Max G line with the G used and if it was a pull or push.

Cheers,

Steve


1518-SW / 6950 / 5.8(0.7) / 15C / L60u / - -

Throttle: Full
Thrust: 11
Drag: 5
FP: 6.5
FP Move: 6
FP Carry: 0.5

Max G: 3 (+2G Pull)
Starting Nose Angle: 15C
Nose Arc Change: 1
C/D Arc: 30C
Ending Nose Arc: 60C
Alt. Change: 250

HFP: 5
VFP: 1

1H (Bank L 2/1) L90v
2H-1V (2Ga/2Ge 3/3) 30L
2H (3Ga/3Ge 2/2) 30L

ET/DT – FD/TD/ND/MD/CD
(11 + 0) - (5 + 2 + 0 + 0 + 9) = 11 - 16 = -5 = -0.5

1921-S / 7200 / 5.3(0.5) / 60C / L90v / - -
Find all posts by this user
Quote this message in a reply
07-04-2014, 03:03 AM
Post: #3
RE: Combined transition and turns
Nice!.
I guessed so but I was just looking for the place and notation for the maneuvers!.

Thanks!.

Pablo

(07-03-2014 06:39 AM)admin Wrote:  Hi Pablo,

Yes, you may combine turns and transitions that have different G-Loading. In your case you are banked at R60u and in the basic rules are limited to facing changes (turns ;-) up to +5 G and transitions of +3G.

Below is a move from a play test game, I would note any transitions in the Max G line with the G used and if it was a pull or push.

Cheers,

Steve


1518-SW / 6950 / 5.8(0.7) / 15C / L60u / - -

Throttle: Full
Thrust: 11
Drag: 5
FP: 6.5
FP Move: 6
FP Carry: 0.5

Max G: 3 (+2G Pull)
Starting Nose Angle: 15C
Nose Arc Change: 1
C/D Arc: 30C
Ending Nose Arc: 60C
Alt. Change: 250

HFP: 5
VFP: 1

1H (Bank L 2/1) L90v
2H-1V (2Ga/2Ge 3/3) 30L
2H (3Ga/3Ge 2/2) 30L

ET/DT – FD/TD/ND/MD/CD
(11 + 0) - (5 + 2 + 0 + 0 + 9) = 11 - 16 = -5 = -0.5

1921-S / 7200 / 5.3(0.5) / 60C / L90v / - -
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content